Autolok SK

enlarge image

The Autolok Hinge
° A hinge which automatically locks straight when the leg
is in full extension
° The simple, push–button mechanism, which releases the
lock to allow the leg to go into flexion, can be activated
by palm pressure if the patient has weak fingers
° The side steels can be contoured for a customised fit
° The low profile design gives the Autolok hinge a high level
of patient compliance
° Autolok hinges can be encased in Neoprene, and the lock
release remains fully functional
° Registered design
1 Autolok II
Code AUT/00
° A front–opening design with patella flap to prevent the
varus/valgus knee protruding
° Distal hinge insertion for ease of hinge removal
° Four circumferential straps ensure a good fit and Easy Open
tabs on the Velcro™ straps make this brace suitable for the
patient with limited dexterity
° Available in beige neoprene
° See chart below for codes and sizes
2 Autolok III
Code AUT/00R
° A front–opening design with patella flap to prevent the
varus/valgus knee protruding
° Distal hinge insertion for ease of hinge removal
° Available in dark blue, ventilated, towelling–lined Neoprene
° See chart below for codes and sizes
Autolok Hinges
Code HH
size code length
short HH/SKPL 28cm 11”
standard HH/PL 41cm 16”
Autolok SK Autolok I Autolok II Autolok III
size universal left right left right left right knee circumference
small SK/03AL VK/13AL VK/23AL AUT/13 AUT/23 AUT/13R AUT/23R 28 - 34cm 11 - 131/2”
medium SK/05AL VK/15AL VK/25AL AUT/15 AUT/25 AUT/15R AUT/25R 34 - 40cm 131/2 - 151/2”
large SK/07AL VK/17AL VK/27AL AUT/17 AUT/27 AUT/17R AUT/27R 40 - 46cm 151/2 - 18”
x large SK/08AL VK/18AL VK/28AL AUT/18 AUT/28 AUT/18R AUT/28R 46 - 56cm 18 - 22”
2
Autolok SK (Not illustrated)
Code SK/00AL
° Incorporated into the original SK knee brace design
° Available in beige neoprene
° See SK on page 24

enlarge image

The Autolok Hinge
° A hinge which automatically locks straight when the leg
is in full extension
° The simple, push–button mechanism, which releases the
lock to allow the leg to go into flexion, can be activated
by palm pressure if the patient has weak fingers
° The side steels can be contoured for a customised fit
° The low profile design gives the Autolok hinge a high level
of patient compliance
° Autolok hinges can be encased in Neoprene, and the lock
release remains fully functional
° Registered design
1 Autolok II
Code AUT/00
° A front–opening design with patella flap to prevent the
varus/valgus knee protruding
° Distal hinge insertion for ease of hinge removal
° Four circumferential straps ensure a good fit and Easy Open
tabs on the Velcro™ straps make this brace suitable for the
patient with limited dexterity
° Available in beige neoprene
° See chart below for codes and sizes
2 Autolok III
Code AUT/00R
° A front–opening design with patella flap to prevent the
varus/valgus knee protruding
° Distal hinge insertion for ease of hinge removal
° Available in dark blue, ventilated, towelling–lined Neoprene
° See chart below for codes and sizes
Autolok Hinges
Code HH
size code length
short HH/SKPL 28cm 11”
standard HH/PL 41cm 16”
Autolok SK Autolok I Autolok II Autolok III
size universal left right left right left right knee circumference
small SK/03AL VK/13AL VK/23AL AUT/13 AUT/23 AUT/13R AUT/23R 28 - 34cm 11 - 131/2”
medium SK/05AL VK/15AL VK/25AL AUT/15 AUT/25 AUT/15R AUT/25R 34 - 40cm 131/2 - 151/2”
large SK/07AL VK/17AL VK/27AL AUT/17 AUT/27 AUT/17R AUT/27R 40 - 46cm 151/2 - 18”
x large SK/08AL VK/18AL VK/28AL AUT/18 AUT/28 AUT/18R AUT/28R 46 - 56cm 18 - 22”
2
Autolok SK (Not illustrated)
Code SK/00AL
° Incorporated into the original SK knee brace design
° Available in beige neoprene
° See SK on page 24

enlarge image

The Autolok Hinge
° A hinge which automatically locks straight when the leg
is in full extension
° The simple, push–button mechanism, which releases the
lock to allow the leg to go into flexion, can be activated
by palm pressure if the patient has weak fingers
° The side steels can be contoured for a customised fit
° The low profile design gives the Autolok hinge a high level
of patient compliance
° Autolok hinges can be encased in Neoprene, and the lock
release remains fully functional
° Registered design
1 Autolok II
Code AUT/00
° A front–opening design with patella flap to prevent the
varus/valgus knee protruding
° Distal hinge insertion for ease of hinge removal
° Four circumferential straps ensure a good fit and Easy Open
tabs on the Velcro™ straps make this brace suitable for the
patient with limited dexterity
° Available in beige neoprene
° See chart below for codes and sizes
2 Autolok III
Code AUT/00R
° A front–opening design with patella flap to prevent the
varus/valgus knee protruding
° Distal hinge insertion for ease of hinge removal
° Available in dark blue, ventilated, towelling–lined Neoprene
° See chart below for codes and sizes
Autolok Hinges
Code HH
size code length
short HH/SKPL 28cm 11”
standard HH/PL 41cm 16”
Autolok SK Autolok I Autolok II Autolok III
size universal left right left right left right knee circumference
small SK/03AL VK/13AL VK/23AL AUT/13 AUT/23 AUT/13R AUT/23R 28 - 34cm 11 - 131/2”
medium SK/05AL VK/15AL VK/25AL AUT/15 AUT/25 AUT/15R AUT/25R 34 - 40cm 131/2 - 151/2”
large SK/07AL VK/17AL VK/27AL AUT/17 AUT/27 AUT/17R AUT/27R 40 - 46cm 151/2 - 18”
x large SK/08AL VK/18AL VK/28AL AUT/18 AUT/28 AUT/18R AUT/28R 46 - 56cm 18 - 22”
2
Autolok SK (Not illustrated)
Code SK/00AL
° Incorporated into the original SK knee brace design
° Available in beige neoprene
° See SK on page 24

enlarge image

The Autolok Hinge
° A hinge which automatically locks straight when the leg
is in full extension
° The simple, push–button mechanism, which releases the
lock to allow the leg to go into flexion, can be activated
by palm pressure if the patient has weak fingers
° The side steels can be contoured for a customised fit
° The low profile design gives the Autolok hinge a high level
of patient compliance
° Autolok hinges can be encased in Neoprene, and the lock
release remains fully functional
° Registered design
1 Autolok II
Code AUT/00
° A front–opening design with patella flap to prevent the
varus/valgus knee protruding
° Distal hinge insertion for ease of hinge removal
° Four circumferential straps ensure a good fit and Easy Open
tabs on the Velcro™ straps make this brace suitable for the
patient with limited dexterity
° Available in beige neoprene
° See chart below for codes and sizes
2 Autolok III
Code AUT/00R
° A front–opening design with patella flap to prevent the
varus/valgus knee protruding
° Distal hinge insertion for ease of hinge removal
° Available in dark blue, ventilated, towelling–lined Neoprene
° See chart below for codes and sizes
Autolok Hinges
Code HH
size code length
short HH/SKPL 28cm 11”
standard HH/PL 41cm 16”
Autolok SK Autolok I Autolok II Autolok III
size universal left right left right left right knee circumference
small SK/03AL VK/13AL VK/23AL AUT/13 AUT/23 AUT/13R AUT/23R 28 - 34cm 11 - 131/2”
medium SK/05AL VK/15AL VK/25AL AUT/15 AUT/25 AUT/15R AUT/25R 34 - 40cm 131/2 - 151/2”
large SK/07AL VK/17AL VK/27AL AUT/17 AUT/27 AUT/17R AUT/27R 40 - 46cm 151/2 - 18”
x large SK/08AL VK/18AL VK/28AL AUT/18 AUT/28 AUT/18R AUT/28R 46 - 56cm 18 - 22”
2
Autolok SK (Not illustrated)
Code SK/00AL
° Incorporated into the original SK knee brace design
° Available in beige neoprene
° See SK on page 24